Textile Calibration
  • facebook
  • twitter
  • linkedIn
  • whatsapp
  • email

Textile Calibration

There are many quality tests that textiles products go through before they come into the market. When it comes to the complexity of textile equipment calibration, it takes the expertise of a highly skilled calibration company to achieve the industry specifications. We calibrate the equipment’s/ machines that assure the operators to perform those tests with confidence. Our calibrations are essential for the machines providing high performance tests.

group_work View our Offerings


    Technical Specification


    Abrasion Tester Calibration

    Weights 9 Kpa – 433 gms
     Weights 12 Kpa – 630 gms
     Inner Diameter – Pilling 24.0 mm
     Outer Diameter – Abrasion 60.5 mm
     RPM 47.5
     Diameter of Sample Cutter 140 mm
     Diameter of Sample Cutter 38mm

    Abrasion Tester Diameter of Sample Cutter
     Abrasion Tester Diameter of Sample Cutter
     Abrasion Tester Inner Diameter – Pilling
     Abrasion Tester Outer Diameter – Abrasion
     Abrasion Tester RPM
     Abrasion Tester Weights

    ASTM Impact Tester (Charpy) Calibration

    All parameter calibration

    NIST sample, Support Anvils set, and Charpy Striker must available in stock with customer. (ASTM Impact Tester (Charpy))

    Bursting Strength Tester Calibration

    Pressure Gauge 124, 81, and 55.2 psi
     Inner Diameter 30.5 mm
     Calculation of test area 7.3 cm2

    Pressure Gauge
     Inner Diameter
     Calculation of test area

    Crock meter Calibration

    Rubbing downward force 918gm
     Diameter of finger peg 16mm

    Diameter of finger, stroke length, counts and Mass

    Dura Wash Calibration

    Temperature 40, 50, 60°C
     Timer 15 min


    Electrolux Dryer Test Cycle Calibration

    Test Cycle 90Min
     Exhaust Temperature 80°C
     Cool down 1min

    Test Cycle
    Exhaust Temperature
     Cool down

    Govmark Flammability Tester Timer Calibration

    1 sec

    Govmark Flammability Tester Timer Calibration

    Perspirometer Weights Calibration

    3.17 Kg and 3.61 kg

    Weights calibration

    Pilling Tester Calibration

    Pilling tube (mass) 10 gm
     Dimension of pilling tube 15x2mm

    Pilling tube (mass)
     Dimension of pilling tube

    TEAR TESTER Calibration

    Distance between clamping jaws 2.8mm
     Specimen tearing tester 15mm
     Pendulum with weight 3200, 6, 1600, 400gm

    Distance between clamping jaws
     Specimen tearing tester
     Pendulum with weight

    Tumble Dryer Calibration

    Time 60Min
    Cotton Sturdy 66 °C
     Delicate < 60°C
     Permanent 66°C

    Time and Temperature Calibration

    Universal wear Tester Stroke motion Calibration


    Speed Calibration

    Vertical Flammability Tester Timer Calibration

    5, 10 Sec

    Time calibration by Comparison Method

    Washer /Washing Machine/Dryer Calibration

    Washer Agitating Speed Normal cycle – 179 spm
     Washer Agitating Speed Delicate cycle - 119 spm
     Washer Agitating Speed Permanent cycle – 179 spm
     Washer Final Spin Speed Time Normal cycle – 6 min
     Washer Final Spin Speed Time Delicate cycle – 4 min
     Washer Final Spin Speed Time Permanent Cycle – 4 min
     Washer Spinning Speed of Washer Normal cycle – 645 rpm
     Washer Spinning Speed of Washer Delicate cycle – 430 rpm
     Washer Spinning Speed of Washer Permanent cycle – 430 rpm

    Washer Agitating Speed
     Washer Final Spin Speed Time
     Washer Spinning Speed of Washer

    Wira Steam Timer Calibration

    30 sec

    Time calibration by Comparison Method

    Wrist action Shaker Temperature Calibration

    35, 50, 70°C

    Temperature calibration



A smart way of managing productive resources

A transformative change significantly alters the profile, capabilities, contours and culture of an organization. Total Productive Maintenance (TPM) is a well-established way of managing production resources for meeting ever-rising standards of productivity, quality and reliability.

Towards Digitally Aided Fabrication

It is estimated that the cycle time of the cutting process stands reduced by a hefty 75%.

Godrej Bambusa Bikes

In 2012, Mr. Vijay Crishna visited Antarctica with British explorer, Sir Robert Swan, to witness climate change, first-hand. During the visit, their group welcomed two young Dutch men who had spent the previous 15 months cycling 16,000 kms from Deadhorse, Alaska to Ushuaia, riding bamboo-framed bikes! Mr. Crishna was very impressed with the bikes, and on his return, he asked the Lawkim team to develop such bikes.

“The essence of strategy is also choosing what not to do!”

Talk of growth, and what comes naturally to mind is: widening of the product offerings, adding new categories, expanding into newer markets, forming strategic alliances and so on.

Sailing the Uncharted Seas

The ‘can-do’ attitude and deep confidence in the capabilities of the team are essential to execute large projects having complex developmental work.

Existing building re-thought

Visit Hubble at Plant 13 Annex for a meal or a meeting and discover what sustainability means to Godrej & Boyce.

Success Equals 80% Planning Plus 20% Execution

Use experience only as an aid and never let it come in the way of preparing a plan that may initially sound unrealistic.

Quality Management Capability

Read more

Assembly Capability

Read more

Design / Product Development

Read more

Godrej Process Equipment manufactures critical equipment of

Read more

The Design team of Godrej Process Equipment comprises of qualified & experienced design engineers

Read more

Our welding engineering has over 1900 qualified procedures for an extremely wide variety of metallurgies

Read more


Thank you for getting in touch!

compare Compare Now