This highly respected and widely used model is accepted today as the bench mark of hand held metal detectors for use in prison and correctional applications worldwide.
The AD15 is particularly effective for locating tiny metal objects that may have been concealed, or ingested within body cavities, with pinpoint accuracy. The AD15 has the ability to be a fully adjustable detector to allow for "maximum find capability".
It also features a green two-position rocker switch or "Turbo Control", to the left of the on/off switch. In the forward position it enables the operator to fully adjust the detector's sensitivity to the desired setting. the operator can then conduct a super high sensitivity search sweep of the subject. By switching the "Turbo Control" to the back position, the AD15 can eliminate large amounts of static metal in flooring (i.e. re-bar or steel beams), walls and ceiling, while still being able to detect, a hand cuff key or a small piece or razor blade in the shoe or sock, with precision and accuracy.
Weight : 280gms including battery
Sensitivity : High Sensitivity - Operator adjustable Turbo Control
Adams model AD2600S is a direct development from our model AD15, in response to the varying needs of prison and correctional officers demands for a higher sensitivity, user-friendly metal detector, specifically designed for body cavity searches.
This device has become known and trusted as a metal detector that really gets the job done!
Now in use all over the world, the AD2600S has proved itself time and time again and is considered the only serious choice for the professional, where an extremely high level of performance is expected.
HF-1 Detector Gloves
Adams new model HF-1 detector gloves give the operator the ability to have "Hands Free" metal detection with the protection of "Kevlar". This gives the wearer the added protection from infected hypodermic needles, knife and razor blade wounds, during pat-down procedures, but still retain the ability to search and detect for concealed weapons or contraband with the aid of a powerful metal detector. When the HF-1 has detected a metal object it will give an alarm indication by means of a vibration against the operator's wrist.
Adams HF-1 detector gloves are of a very rugged and durable construction. They are light-weight and comfortable to wear, as well as being easy to use, with no adjustments necessary for use. Just switch them on and they are ready to go, its that simple!
The electronic circuitry is housed inside the glove so each hand is a self contained metal detector with no visible wires or switches etc. The detector is powered by one standard 9 volt battery or optional re-chargeable NiCad. The HF-1 gloves are available as a "Dual Active" (D/A) pair (one metal detector for each hand) or as a "Passive Active" (P/A) (one glove, of the operator's choice, either left or right hand has metal detector technology built in) while the other corresponding glove (left or right) is "Blank" (has no technology inside).
HF-1 is suitable for law enforcement, tactical operations, crowd control and military applications.
The "MIT" also gives the operator's fingers complete dexterity to feel for concealed objects that are of a non-metallic nature, simultaneously. "MIT" is fully automatic and requires no adjustments for use. It is powered by one standard 9 volt battery or optional NiCad rechargeable battery. There are no visible wires, switches or buttons. Everything is housed in a machine washable, soft stretching neoprene(wet-suit) material. The operator just puts the "MIT" into the "on" mode and begins a pat-down search.....It's that simple!
Adams "MIT" detects all metals and alloys
Technical Specifications - MIT & HF-1